Bike Servicing & Repairs in Perth
Professional servicing for road, gravel, mountain and e-bikes
West Coast Cycles provides professional bike servicing and repairs from our North Beach workshop. From routine tune-ups to complete overhauls, tubeless setup, brake work, drivetrain servicing and e-bike maintenance, our aim is simple: keep your bike safe, reliable and riding at its best.
Choose a service package below or book online. If you are not sure what your bike needs, bring it in and we will inspect it before any work begins.
Workshop Service Packages
-
Essential Service — $119
Includes:
- Full safety inspection
- Gear adjustment and indexing
- Front and rear derailleur adjustment
- Brake adjustment
- Check brake pads and rotors
- Check chain wear
- Lubricate chain
- Check tyres for wear and damage
- Set tyre pressures
- Check wheels for obvious buckles or loose spokes
- Check headset for play
- Check bottom bracket and crankset for play
- Check hubs for play
- Check handlebars, stem and controls
- Check and torque critical bolts
- Basic frame and bike wipe-down
- Final road test
- Final safety check -
Comprehensive Service — $169
Includes:
- Full safety inspection
- Gear adjustment and indexing
- Front and rear derailleur adjustment
- Check derailleur hanger alignment
- Brake inspection and adjustment
- Check brake pads and rotors
- Check hydraulic brake operation
- Check headset for play
- Check bottom bracket for play
- Check crankset and pedals
- Check hubs and wheel bearings for play
- Check wheel true and spoke condition
- Check tyres for wear or damage
- Set tyre pressures
- Check chain wear
- Clean and lubricate chain
- Light drivetrain clean
- Clean derailleur pulleys and accessible drivetrain components
- Lubricate cables and pivot points where appropriate
- Check and torque critical bolts
- Check handlebars, stem and controls
- Check frame and fork for visible damage
- General bike clean/wipe-down
- Final road test
- Final safety check -
Complete Overhaul — $239
Includes:
- Full bike safety inspection
- Remove and thoroughly clean drivetrain
- Check chain wear and drivetrain condition
- Full gear adjustment and indexing
- Check derailleur hanger alignment
- Adjust front and rear derailleurs
- Brake inspection and adjustment
- Brake pad inspection
- Rotor inspection and alignment
- Hydraulic brake lever feel/check for leaks
- Wheel removal and inspection
- Check wheel true and spoke tension
- Check hubs for play or rough bearings
- Check headset adjustment and bearings
- Check bottom bracket for play or roughness
- Check crankset and pedals
- Check frame and fork for visible damage
- Check handlebars, stem and controls
- Torque critical bolts to specification
- Check tyres for wear/damage
- Set tyre pressures
- Lubricate chain
- Lubricate cables/pivot points where appropriate
- Clean frame, wheels and components
- Final road test
- Final safety checkWhere required, the overhaul labour includes:
- Replacing chain
- Replacing cassette
- Replacing brake pads
- Replacing cables
- Replacing tyres/tubes
- Replacing bar tape
E-Bike Servicing
-
E-Bike Essentials Service — $159
Includes:
- Full mechanical safety inspection
- Gear adjustment and indexing
- Brake adjustment
- Check brake pads and rotors
- Check chain wear and lubricate chain
- Check tyres for wear/damage and set pressures
- Check wheels for obvious buckles or loose spokes
- Check headset, bottom bracket, cranks and hubs for play
- Check handlebars, stem and controls
- Check and torque critical bolts
- Inspect motor mounting points
- Inspect battery fit, mounts and locking mechanism
- Inspect charging port and visible electrical connections
- Check display and control unit operation
- Check motor assistance through all support modes
- Check speed sensor and magnet alignment
- Check lights if powered by the bike
- Basic fault-code check where accessible through the bike/display
- Basic frame and bike wipe-down
- Final test ride
- Final safety check -
E-Bike Premium Service — $199
Includes:
- Full mechanical and electrical safety inspection
- Complete gear adjustment and indexing
- Check derailleur hanger alignment
- Brake inspection and adjustment
- Check brake pads, rotors and braking performance
- Check hydraulic system for leaks and lever feel
- Check chain wear
- Thorough drivetrain clean
- Clean chain, cassette, chainrings and derailleur pulleys
- Lubricate drivetrain
- Check crankset and pedals
- Check bottom bracket for play or roughness
- Check headset adjustment and bearings
- Check hubs and wheel bearings
- Check wheel true and spoke tension
- Inspect tyres for wear/damage and set pressures
- Check handlebars, stem and controls
- Torque critical bolts to specification
- Inspect frame and fork for visible damage
- Check rack, guards and accessories where fitted
Additional Workshop Charges
-
Component servicing (parts are additional)
Gear adjustment - $30
Brake adjustment/service - $30
Brake Bleed - $40 (per brake caliper)
Headset Service - $80
Bottom Bracket Service - $100
-
Lube and Waxing
Chain clean and lube - $40
Full waxing service - $100 (this includes cleaning chainrings, chain, cassette and jockey wheels and fully waxed chain, new quicklink inc)
Chain immersive waxing - $30 (for previously waxed chain; new quicklink is $10 optional)
-
Wheels and Tyres (labour charges only)
Tube replacement labour (per wheel) - $10 (e-bikes $10 extra)
Tyre change labour (per wheel) - $15
Tyre change - e-bike (per wheel) - $25
Sealant top up (per wheel) Road - $37
Sealant top up (per wheel) Gravel - $39
Sealant top up (per wheel) MTB - $42
Tubeless conversion Road (per wheel inc sealant, valves extra) - $45
Tubeless conversion Gravel (per wheel inc sealant, valves extra) - $50
Tubeless conversion MTB (per wheel inc sealant, valves extra) - $52
Wheel True (per wheel) - $40
-
Other
Minimum workshop charge - $30
Hourly Charge - $100
Boxing Bike - $100
Bike Build - $100/hour. Normally 2–5 hours depending on build complexity; we will confirm the estimate before starting.